New Cusco lower brace for Nissan Pao, Be-1, Figaro and K10 Micra/March

This is a brand new Cusco lower brace for the Nissan Pao, Be-1, Figaro and K10 Micra/March.

These lower front braces are produced to reduce body flex in the listed Nissan cars.
They will primarily be used for performance cars and hard cornering.
They are very easy to fit, requiring only 2 (already fitted) bolts to be removed and then replaced with the supplied washers.

A few months back I managed to import a limited amount of lower braces from Japan.
We started testing it out on ours upon receipt, then later asked Fabian if he would be interested in fitting one to Yiyi's SR20 swapped Pao before we started selling them.
The effect on normal day-to-day driving it is not noticeable.

Fabian and we had to modify our non-standard wide exhuasts (we have 2.25" and Yiyi 2.5") to prevent them bumping, but if you have a standard exhaust then this should not be a problem.
We have also been testing the brace on local speed bumps in the centre of the road, neither us or Yiyi have found any that come close. But we cannot guarantee this for your car and local speed bumps, especially if your car is particularly low.
Both Yiyi's and our Paos are on coilovers, so are mildly lowered.

In the photos you will see:
Photo 1: A brace fitted to Yiyi's SR20 FWD Pao.
Photo 2: Our own brace fitted on our own Pao.
Photo 3: The recess at the end of the brace where nuts are threaded on.
Photo 4: The flat side of the end that butts up to the body of Yiyi's Pao.
Photo 5: A warning on the supplied instructions that state:
"This product is designed for use in japan only. It must not be used in any other country."**

**Because of the warning issued by Cusco, we cannot be held responsible for its use on your own Pao.
We and Yiyi have chosen to take the risk and have informed our insurance companies of having additional bracing. Fitting is at your own risk!

Cusco is a good quality performance parts maker that has a heritage in racing and parts being available to people who like to modify their cars.

International shipping for this item will be slightly more expensive due to its length, please message if you would like a quote, with your country and post/zip code.

Thank you to Yiyi and Fabian for their feedback and assistance.

Please follow Yiyi for more updates on her immaculate 'first (one) of a kind' SR20 Pao.

If you have any questions about anything for sale or would like to have more photos of a particular item/s, then please do ask via the contact form.